LeanActivity.

Standard Work

Also known as: Standardised workLean Glossary · Tools & Methods

Definition

Standard work is the current best way to do a task, written down and agreed by the team that does it. In Lean it defines three elements, takt time, the work sequence and the standard work in progress, and it is the baseline for every improvement.

What standard work means

Standard work comes from the Toyota Production System, where Taiichi Ohno saw it as the basis of improvement: without a standard there is nothing to measure a change against, so there can be no real improvement. A standard is not fixed forever. It is the best known method today and is updated with every Kaizen.

Good standard work is written by and with the people who do the work, not imposed from an office. It makes work repeatable, simplifies training and makes deviations visible, because everyone knows what normal looks like.

The three elements of standard work

  • [Takt time](/lean-glossary/takt-time): the pace at which the customer needs one unit, which sets the rhythm of the work.
  • Work sequence: the exact order of the steps in which an operator does the job, including walking.
  • Standard work in progress: the minimum number of units that must be in the process for the work to flow smoothly.

Typical documents are the standard work sheet (layout, walking path, sequence and standard work in progress), the standard work combination table (manual, machine and walking time per step against takt) and a job instruction sheet for training.

How to create standard work

  1. Observe the workWatch several cycles at the Gemba and time each step.
  2. Find the best methodCompare operators and shifts, keep the best practices and remove waste.
  3. Write it down simplyUse photos, a layout sketch and short key points, including the reasons for critical steps.
  4. Train and checkTrain everyone on the standard and let team leaders check it regularly at the workplace.
  5. Improve itWhen someone finds a better way, test it and update the standard.

Example and common mistakes

At an assembly station, standard work defines that the operator first takes the housing, then fits the motor, then the switch, and finally tests the unit, always with one finished unit waiting for the next station. In an office, a standard checklist for setting up a new customer plays the same role.

  • Writing standards nobody reads: long text documents instead of a visual sheet at the workplace.
  • Treating the standard as a rule from above that may not be changed.
  • Confusing standard work with work instructions and leaving out takt and standard work in progress.
  • Never checking the standard, so actual work and documents drift apart.

Go deeper

Standard Work: questions and answers.

What is the difference between standard work and a work instruction?

A work instruction describes how to do a task. Standard work goes further: it links the work sequence to takt time and the standard work in progress, so it also defines the pace and the flow.

Who should write standard work?

The people who do the work, supported by their team leader and an engineer where needed. Standards written at a desk without the team are rarely followed.

Does standard work kill creativity?

No. It frees people from reinventing routine tasks and gives them a clear baseline, so their ideas can be tested and turned into a better standard.

Learn Standard Work by playing it.

Lean terms stick when a team experiences them. The LeanActivity games turn them into rounds your team plays, measures and improves.