LeanActivity.

Jidoka

Also known as: Autonomation · Automation with a human touch · Built-in qualityLean Glossary · Principles

Definition

Jidoka is the Lean principle of stopping a process as soon as an abnormality occurs, so that no defect is passed on. Machines detect problems and stop themselves, and people are allowed to stop the line, which frees operators from watching machines and builds quality into the process.

Where Jidoka comes from

Jidoka is one of the two pillars of the Toyota Production System, next to Just-in-Time. Its roots go back to Sakichi Toyoda, whose company later gave rise to Toyota. He invented a loom that stopped automatically when a thread broke. Because the machine stopped itself, one operator no longer had to watch one loom and could look after several.

The English term autonomation, automation with a human touch, describes the idea: the machine has the judgement to stop when something goes wrong. Jidoka applies to people too. On Toyota’s lines any operator may stop the process with the Andon cord when they see a problem.

The four steps of Jidoka

  1. Detect the abnormalityA sensor, a gauge or the operator notices that something deviates from the standard.
  2. StopThe machine or the line stops, so the defect is neither repeated nor passed on.
  3. Fix the immediate problemThe team removes the defective part and restores normal conditions.
  4. Investigate the root causeThe team finds out why it happened and installs a countermeasure, for example a Poka-Yoke device, so it does not happen again.

Jidoka examples

  • A press stops automatically when a sensor detects two sheets instead of one.
  • A torque-controlled screwdriver signals a fault and blocks the next cycle when a screw does not reach its torque.
  • A filling machine stops when the weight of a container is outside the tolerance.
  • In an office, a form cannot be submitted while a mandatory field is empty, and an incomplete order goes back to the sender instead of moving on to the next department.

In every case the process itself detects the problem, so nobody has to watch it constantly, and the problem becomes visible at the moment it happens. Operators no longer stand beside a machine waiting for it to fail; they can spend their time on work that needs judgement.

Common mistakes

  • Restarting after a stop without asking why it stopped.
  • Seeing stops only as lost output. In Jidoka, a stop is the chance to fix a problem that would otherwise come back.
  • Automating everything at once. Simple, reliable detection is often better than complex technology.
  • Blaming the person who stopped the line, which teaches everyone to keep quiet next time.

Go deeper

Jidoka: questions and answers.

What is the difference between Jidoka and automation?

Automation lets a machine do the work. Jidoka adds the ability to detect an abnormality and stop, so the machine does not keep producing defects and nobody has to stand beside it watching.

What are the two pillars of the Toyota Production System?

Just-in-Time and Jidoka. Just-in-Time makes only what is needed, when it is needed and in the amount needed; Jidoka makes sure that what is made is right by stopping at every abnormality.

Is Jidoka the same as Poka-Yoke?

Not quite. Jidoka is the principle of stopping at an abnormality. Poka-Yoke is a tool that prevents or detects a specific error, and it is often used to put Jidoka into practice.

Learn Jidoka by playing it.

Lean terms stick when a team experiences them. The LeanActivity games turn them into rounds your team plays, measures and improves.